 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Monitoring Adapter Status from a Remote System (ServeRAID)
Monitoring Adapter Status from a Remote System
The ServeRAID Administration and Monitoring programs support the Client/Server environment
using TCP/IP on a variety of platforms. The server programs run on the system containing a ServeRAID adapter
and is supported on a number of operating systems. See the README file on the Admistration and Monitoring program
for more information. The Client program runs in various Windows environments:
- Windows NT Server Version 3.51
- Windows NT Workstation Version 3.51
- Windows 95
The Client program includes many of the functions contained in the ServeRAID configuration program.
Because it resides on top of the operating system, you do not need to restart the server to add and remove capacity
dynamically when creating or deleting an array. You can start the Administration and Monitoring program from the
active operating system desktop.
This monitoring program allows you to:
- View the ServeRAID configuration and associated devices.
- Reassign a drive to replace a defunct drive.
- Create a logical drive.
- Create an array
- Delete an array
In addition, in an array that contains only one logical drive, and the total number of logical drives in all
arrays is less than 7, you can change the logical drive RAID level from level 0 to level 5 (or level 5 to level 0).
See the README file on the Administration and Monitoring program for instructions on installing and using this
monitoring utility.
Back to 
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.