 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Installing the NetWare Device Driver
Chapter 4. Installing the NetWare Device Driver
This section provides instructions for installing the NetWare device driver in an already
installed Novell NetWare system.
NetWare Driver Files and Parameters
The following files on the Netfinity Fibre Channel DOS Device
Drivers diskette are provided for installation of the NetWare 4.1X driver:
- NETWARE\QL2100.HAM - driver for NetWare 4.1X
- NETWARE\README.TXT - helpful hints about the driver and setting options for NetWare 4.1X
Be sure to review the README.TXT file for both new and changed information.
To customize the interface between the driver and Novell NetWare, load the QL2100.HAM driver
with the following parameters.
| Parameter |
Description |
|
| SLOT |
Provides support for multiple QL2100F adapters and loads the driver for |
| |
each adapter individually. |
| |
This switch is mandatory if you have more than one adapter. |
| |
| /LUN |
Enables support for multiple LUN (logical unit number) devices. |
| |
This switch is optional. |
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.