IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Installing SCO UnixWare and the QLC2100F Device Driver

1.  Follow the installation instructions that come with the SCO UnixWare 7.0 installation diskette.  During the installation, you will be prompted to install the driver for the adapter.

    When installing SCO UnixWare 7.0, the following choices appear (the asterisk is the system default):

         ( ) Install HBA diskette
         (*) Proceed with installation
    

2.  Remove the SCO UnixWare installation diskette and insert the Netfinity Fibre Channel SCO UnixWare HBA driver diskette.
   1.  Press Enter; then select Install HBA diskette.
   2.  Press F10 to continue; the QLC2100F driver is automatically installed.

3.  At the end of the installation, you are prompted with the following
    (the asterisk is the system default):

         ( ) Install HBA diskette
         (*) Proceed with installation
    

    Remove the Netfinity Fibre Channel SCO UnixWare HBA driver diskette and press F10.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.