IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Slide Rails Installation (3551-001)

1.  Loosen the eight adjustment screws on both side rails and adjust to fit the rack.
2.  Secure the slide rails to the rack cabinet using eight M6 screws and eight rack mounting nuts.  Make sure both side rails are parallel and level to one another in the rack cabinet.
3.  Tighten the eight rail adjustment screws.
4.  Once the slide rails are secured to the rack, carefully slide the NetMEDIA chassis onto the slide rails.
5.  Secure the NetMEDIA chassis with two M6 screws and two rack mounting nuts.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.