|
|
|
Instructions for Using the IPSSEND utility: The IBM PC ServeRAID and
ServeRAID II Adapters provide the IPSSEND utility as a means for data scrubbing
under all supported operating systems.
The IPSSEND utility is available on the
IBM ServeRAID Supplemental Diskette at:
http://www.us.pc.ibm.com/files.html
Search on 'ServeRAID.'
The IPSSEND
utility may be coupled with a third party event scheduler, such as REXXWARE by
Simware Corporation, available at:
http://www.simware.com
or the AT Scheduler that is built into Windows NT.
The syntax of IPSSEND is described below.
Note:
In the following command, replace <
adapter number
> with the adapter number
and replace <
logical drive number
> with the logical drive number.
At a command prompt, type the following:
ipssend synch <adapter number> drive <logical drive number>
where the adapter number starts at 1 and logical drive number starts at 0.
The IBM ServeRAID Administration and Monitoring Utility displays the logical
drive numbers and their corresponding adapter numbers.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.