 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Monitoring Adapter Status from a Remote System
Monitoring Adapter Status from a Remote System
The ServeRAID WIN32-based Administration and Monitoring Utility provides
a graphical-user interface that enables you to monitor ServeRAID
configuration changes being performed on the server while it is fully operational.
You can create an array, delete an array, create a logical
drive, change the RAID level, dynamically increase the logical drive
size, rebuild an array, and perform other basic ServeRAID configuration functions.
Depending on the network operating system, you can run this program
either locally on the server or remotely using TCP/IP.
- You can use the WIN32-based program locally with:
- You can use the WIN32-based program remotely using TCP/IP and a Background Server component with:
- Microsoft Windows NT
- IBM OS/2 Warp Server and OS/2 LAN Server
- Novell NetWare 3.12 and 4.1x
- SCO OpenServer 5.0.x
- SCO Unixware 7.0
Note:If you use SCO OpenServer or Unixware,
you must perform all administration functions from a remote WIN32-based client.
See the README file on the Administration and Monitoring Utility for
instructions on installing and using this monitoring utility.
Back to 
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.