 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Security
Security
You can add elements to the server to help to protect the server itself from theft and tampering, and to help to
protect the data and programs stored in the server from unauthorized access and use.
Installing a U-Bolt and Security Cable: You can help to deter unauthorized removal of the tower
model Netfinity 5000 by installing a U-bolt and security cable on the rear of the server.
Before you begin
- Obtain the following:
- A U-bolt
- A flat-blade screwdriver
- An adjustable wrench
- A 19 mm (3/4 in.) U-bolt or wire rope (similar to National Manufacturing No. 3230, Stock No. 176-735)
- Threaded nuts that fit the U-bolt
- A security cable
- A lock, such as a combination lock or padlock
- Read 'Safety Information'
To install a U-bolt and security cable:
- Remove the server cover. See 'Option Installation'.
- Insert the U-bolt through the holes and secure it in place with the nuts.
- If you have completed installing the U-bolt and do not want to install any other internal options, replace the
server cover and reconnect all external cables and power cords (see 'Completing the Installation'
if you need additional information).
- Thread the cable through the U-bolt and around an object that is not a part of or permanently secured to
the building structure or foundation, and from which it cannot be removed, then, fasten the cable ends
together with a lock.
Back to 
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.