 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Configuring PCI Features and Options
Configuring PCI Features and Options:
PCI devices automatically communicate with the server configuration information.
This usually results in automatic configuration of a PCI device.
If a conflict does occur, see 'Resolving Resource Conflicts'.
Multiple-function PCI adapters use more than one interrupt. When you install one of these adapters,
review the IRQ assignments in the Configuration/Setup utility programs (see 'PCI Bus Control').
Verify that the IRQ assignments are correct.
The Netfinity 5000 server uses a rotational interrupt technique to configure PCI adapters.
This technique enables you to install a variety of PCI adapters that currently do not support sharing
of PCI interrupts. For information on manually overriding the interrupt setting, see 'PCI Bus Control'.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.