|
|
|
Environment Minimum Maximum
----------------------------------------------------
Operating 0°C (32°F) 55°C (131°F)
temperature
Storage -20°C (-4°F) 70°C (158°F)
temperature
Relative humidity 10% 90%
(noncondensing)
Storage humidity 5% 95%
(noncondensing)
| Type | Specification |
|---|---|
| Host bus | Conforms to PCI Local Bus Specification, revision 2.1 |
| PCI signaling environment | 3.3 V and 5.0 V buses supported |
| PCI transfer rate | 264 MB per second maximum burst rate for 33 MHz operation |
| (ISP2100 chip) | |
| Fibre Channel specifications | Bus type: fibre optic media (QLA2100F) |
| Bus transfer rate: 100 MB per second maximum | |
| Central processing unit (CPU) | Single chip design that includes a RISC processor, Fibre Channel |
| protocol manager, PCI DMA controller, and 1-gigabit transceivers | |
| Host data transfer | 64-bit, bus master DMA data transfers to 264 MB per second |
| RAM | 128KB of SRAM |
| BIOS ROM | 128KB of flash ROM in two 64KB, software selectable banks. |
| The flash is field programmable. | |
| NVRAM | 256 bytes, field programmable |
| Onboard DMA | Three independent DMA channels: two data and one command. |
| Integrated 4KB frame buffer FIFO for each data channel | |
| Connectors (external) | SC-style connector that supports non-OFC, multimode fibre optic |
| cabling using 1 x 9 fibre optic transceiver module. | |
| Total cable length cannot exceed 500 meters. | |
| Form factor | 17.78 cm x 10.67 cm (7.0 in. x 4.2 in.) |
| Operating power | Less than 15 watts |
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.