Switch Settings
If the microprocessor bus-to-core ratio is incorrect,
system-board components will overheat and component damage might occur. Be sure that
microprocessor switch settings on the microprocessor switch are set properly according to the speed
of the microprocessor.
There are eight switch settings on the microprocessor switch. The switch settings have the following meanings:
(see switch pictures on left panel, below sys-board)
| Switch Number |
Purpose |
|---|---|
| 1 | Core ratio |
| 2 | Core ratio |
| 3 | Core ratio |
| 4 | Core ratio |
| 5 | System bus speed |
| 6 | System bus speed |
| 7 | Serial port B ° On - Enables Serial B port ° Off - Disables Serial B port |
| 8 | Diskette Drive ° Off - Normal diskette operation ° On - Enables read-only diskette operation |
System Board Memory Configuration
The following DIMM configurations are supported.
NOTE: Standard memory-module configurations are
subject to change.
| Configuration | Speed | Type | Size (MB) |
|---|---|---|---|
| Standard | 60 ns | EDO ECC |
32 |
| Optional | 60 ns | EDO ECC |
32, 64, 128 |
| Total Memory |
Mem1 | Mem2 | Mem3 | Mem4 |
|---|---|---|---|---|
| 32 | 32 | - | - | - |
| 42 | 32 | 16 | - | - |
| 48 | 16 | 16 | 16 | - |
| 64 | 64 | - | - | - |
| 64 | 32 | 32 | - | - |
| 64 | 32 | 16 | 16 | - |
| 96 | 32 | 32 | 32 | - |
| 128 | 128 | - | - | - |
| 128 | 64 | 64 | - | - |
| 256 | 128 | 128 | - | - |
| 256 | 128 | 64 | 64 | - |
| 512 | 128 | 128 | 128 | 128 |
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.