IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

ServeRAID Mini-Configuration Program

1.  Turn on the server. If the server already is turned on, press Ctrl+Alt+Del.
2.  When the ServeRAID Mini-Configuration prompt appears, press Ctrl+i.
3.  If your system contains more than one ServeRAID adapter or controller, a selection screen will appear.

    To continue:

   1.  Use the Up Arrow (  ) or Down Arrow (  ) key to select an adapter or controller.
   2.  Press Enter.

    If your system contains only one ServeRAID adapter  or controller, or after you select a ServeRAID adapter  or controller, the Main Menu appears.

    Descriptions of the choices available from the Main  Menu of the Mini-Configuration program are as  follows:

   •  View Controller Status shows the current status of the ServeRAID adapter or controller. (See  'Viewing the Controller Status' for more information.)
   •  View Configuration shows the current configuration information for the ServeRAID  adapter or controller. (See 'Viewing the Configuration' for more information.)
   •  Advanced Functions lets you initialize the configuration, import configuration from drives,  configure BIOS settings, and view the controller and PCI information.
      (See 'Advanced Configuration Functions' for more information.)

4.  Use the Up Arrow (  ) or Down Arrow (  ) key to  highlight your choice, then, press Enter.
5.  Follow the instructions that appear on the screen.
6.  Click on Exit to leave the Main Menu.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.