|
|
|
You should install NetFinity Manager 5.0 or greater in order to monitor the RAID array
remotely. NetFinity Manager can be used to schedule synchronization to occur at any time of the
day, so synchronization of the RAID array can be scheduled for non-peak hours and will not
require user input to get things started. With NetFinity services installed at the server, and the
NetFinity manager installed on a workstation, the RAID array can be monitored, and even
synchronized, from a remote location. The system can also be configured to send alert messages
regarding the RAID subsystem over the network to the workstation. You can even setup
NetFinity Manager to page someone, e.g., the network administrator or a service technician, if a
certain alert condition is reached. NetFinity Manager can also perform many other functions such
as monitoring processor utilization, critical file monitoring and detecting installed software
across the network. NetFinity is also used to capture PFA alerts from hard files and then send
system alerts to the appropriate parties. In order to use Netfinity 5.0 to schedule data scrubbing,
please download NF50RAID.EXE from http://www.us.pc.ibm.com/files.html , This file contains
updated Netfinity program files which are required for scheduling data scrubbing on controllers
with the write policy set to write-back cache. When installed with the NetFinity Manager code
the following operating systems are affected: OS/2, WINNT, and WIN9S.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.