IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

ServeRAID Controller Administration

Copying the Drive Configuration to the ServeRAID Controller:
 
You can copy the configuration information stored on the hard disk drives to thr ServeRAID controller.
This procedure is useful when you install drives from other systems.

During the copy procedure, the ServeRAID controller automatically performs any necessary rearrangement of the configuration, then, the controller writes the new configuration information back to the reserved area on the configured hard disk drives.

To copy the drive configuration information to the ServeRAID controller:

1. Click on the   icon on the tool bar or select Adapter Configuration from the Advanced pull-down menu.
    A screen similar to the following appears.
    
   
2.  Select Copy Drive Configuration to Adapter, then click on OK

Copying the ServeRAID Controller Configuration to the Drives
 
You can copy the configuration information stored in the ServeRAID controller to all configured hard disk drives.

To copy the ServeRAID controller configuration information to the drives:

You can copy the configuration information stored on the hard disk drives to the ServeRAID controller. This procedure is useful when you install drives from other systems.

You can copy the configuration information stored in the ServeRAID controller to all configured hard disk drives.

1. Click on the   icon on the tool bar or select Adapter Configuration from the Advanced pull-down menu.
    A screen similar to the following appears.
    
   
2.  Select Copy Adapter Configuration to Drives, then click on OK.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.