IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Using the Server Utility Programs

IPSADM <parameter 1> <parameter 2> ... <parameter n>



Descriptions of the optional command-line parameters are as follows:
IPSADM.LOG server security, see 'Server Security File'.

Command	Description
-?	The -? command displays the help for the valid parameters.
-p:number	The -p:number command specifies the port number on which
	the server will check for client connections.
	The port number is a parameter used in TCP/IP to distinguish
	between different services on a single server. The default
	for the ServeRAID utilities is port number 1087. You can change
	the port number on the command line if another service on the
	system is using 1087.
-d	The -d command disables logging of messages to the display.
-f	The -f command specifies to log messages to the default file,
-f:filename	The -f:filename command specifies the name of a file
	in which to log messages. Messages can be logged to the
	screen or to a text file on the system. The default setting logs
	messages to the standard output (usually the display), but you can
	disable this by using the -d parameter.
	The -f parameter enables logging messages to a file. Messages consist
	of startup information, connecting and disconnecting clients, and error
	error messages.
-s:filename	The -s:filename command specifies the name of the file
	that contains security information. For more information about

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.