IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Device Driver Installation

1.  Insert the adapter configuration diskette into the diskette drive.
2.  Open an OS/2 window.
3.  At the OS/2 prompt type:

     A:

    and press Enter

4.  At the A: prompt type:

     OS2\SETUP

    and press Enter

5.  Follow the menu prompts to complete the installation.
6.  Restart the system to activate the device driver.

Windows NT Device Driver Installation:

The Windows NT adapter device drivers are stored in the Windows NT system directories.

To install the adapter device drivers:

1.  Insert the adapter configuration diskette into the diskette drive.
2.  Log on with administrator privileges.
3.  Open a DOS window.
4.  At the DOS prompt type:

     A:

    and press Enter

5.  Type CD\NT

    and press Enter

6.  Type SETUP

    and press Enter

Novell NetWare Device Driver Installation:

To install the Novell NetWare adapter device driver:

1.  Insert the adapter configuration diskette into the diskette drive.
2.  At the NetWare prompt type

     LOAD A:\NETWARE\SETUP

    and press Enter

3.  Follow the on-screen prompts. If you accept the default choices, the adapter  device driver is copied to the hard disk as:

     SYS:\SYSTEM\IBMSPN.NLM

    and the AUTOEXEC.NCF file is updated.

4.  To load the adapter device driver:
   1.  Restart the system

        - or -

   2.  At the NetWare prompt type:

       SEARCH ADD path  (where path is the path the driver was copied to in step 3)

       and press Enter

       At the NetWare prompt type

        Load IBMSPN port-adrs irq  (where port-adrs 
        is the port address you selected and irq 
        is the interrupt you selected during the adapter
        configuration procedure)

       and press Enter

       The adapter device driver will load without restarting the server.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.