Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Removal, Cooling Fan (9306)



Cooling Fan

To remove the cooling fan:
  1.  Power-off the rack.
  2.  Open the rear door of the rack cabinet.
  3.  Disconnect the power plug from the rear of the cooling fan.
  4.  Use a 5/16-inch wrench to remove the eight nuts that secure the  cooling fan to the top of the rack cabinet.
  5.  Remove the cooling fan from the cabinet.


Note: When installing the fan, make sure that the green and yellow ground wire is attached to one of the top fan mounting screws and that the strain-relieving clamp is attached to another. The power cable should be secured by the strain-relieving clamp.

Cooling Fan Removal


 

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.