 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Powering Off The Rack (9306)
Powering Off The Rack
Before performing service on the rack, follow this procedure
to prevent personal injury and to avoid damaging the rack and
the installed servers.
To power-off the PC Server Rack:
- Shut down and power-off all installed servers.
- Open the rear door of the PC Server Rack cabinet.
- Power-off the server selector unit.
The power switch for the server selector unit is located in the upper right corner of the rear of the server selector unit.
- Disconnect power from the PC Server Rack.
- If the rack is plugged into a wall-mounted power supply, disconnect the power cord plug from the wall socket.
- If the power cord is wired directly into the installed location's power supply, open the
rear door of the rack cabinet and disconnect the power plug from the base of the power distribution unit.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.