SCSI / RAID Cable - Connectors
See > Power Cords Netfinity Server-8651, Expansion Unit-3520
| Index EXP10 - 3520 / Model 1RU, 1RX | FRU P/N |
|---|---|
| 1 Rail Kit | 01K6670 |
| 2 Blower Assembly | 01K6672 |
| 3 250W Power Supply Assembly | 01K6676 |
| 4 Electronic Module (ESM) | 01K6674 |
| 5 Midplane/Frame | 01K6673 |
| NOTE: The midplane board and frame | |
| are replaced as a unit. If either | |
| part is needed, order the above FRU. | |
| 6 Bezel, Front | 01K6668 |
| 7 Blank Tray, with bezel | 01K6667 |
| 9 SCSI Terminator | 92F0432 |
| Misc Hardware Kit | 01K6671 |
| ° ESM Lever Screws (2 each) | |
| ° Power Supply Lever Screw | |
| ° Power Cord Retainer | |
| ° Power Cord Retainer Knurled Nut | |
| ° EMC Clips (6 each) | |
| ° Tray Spring | |
| ° 6-32 Tray Spring Screw | |
| ° 6-32X 1/4-Inch Drive Screws (2 each) | |
| ° ESM Latch Left | |
| ° ESM Latch Right | |
| ° Power Supply Latch | |
| ° Light Pipes (2 each) | |
| ° 6-32X 1/2-Inch Screw | |
| ° M6 Rail Screws (2 each) | |
| ° M5X8L Screw | |
| ° M3X5L Screw | |
| ° Large Spacer (2 each) | |
| SCSI Cable, 0.4M external | 01K6669 |
| 3m NF-EXP10 External Auto-Sensing Cable | |
| (OPT P/N 03K9352) | 01K6488 |
| 4.5GB Hard Disk Drive with tray and bezel (7,200 RPM) | |
| see > HDD Firmware upgrade | 01K6675 |
| 9.1GB Hard Disk Drive with tray and bezel (7,200 RPM) | |
| see > HDD Firmware upgrade | 01K6679 |
| 4.5GB Hard Disk Drive with tray and bezel (10,000 RPM) | 01K6682 |
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.