 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Performing a Shutdown (Netfinity EXP10 - 3520)
Performing a Shutdown
NOTE: If the Expansion Unit loses power unexpectedly, it
might be be due to a hardware failure in the power system or mid-plane
(see 'Symptom-to-FRU Index').
To perform a shutdown:
- If possible, stop all activity and check the LEDs (front
and back). Make note ot any fault LEDs that may be
lit so you can correct the problem when you turn on the power again.
- Turn off both power supply switches, then, unplug
both power cords trom the Expansion Unit.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.