IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Status Indicators (Netfinity 7000 - 8651)

•  CD-ROM Drive In-Use Light When this light is lit,  the CD-ROM drive is being accessed.
•  Diskette Drive In-Use Light When this green light  is lit, the diskette drive is being accessed.
•  Power-On Light When this green light is lit, system  power is present in the server.

  NOTE: If this light is off, it does not mean there is no  electrical current present in the server. To remove all electrical current from the server, you  must unplug the server power cord from the electrical outlet.

•  Power-Failure Light When this amber light flashes,  a power supply or the power-supply controller has  failed. Refer to 'Status Indicators' for more information.
•  Cooling-Failure Light When this amber light  flashes, a fan problem has occurred or the server has  overheated. Refer to 'Status Indicators' for more information.
•  Hot-Swap Drive Subsystem Failure Light When  this amber light flashes, a hard disk drive has failed  or one of the SCSI backplanes has overheated.  Refer to 'Status Indicators' for more information.
•  Information Panel System monitor information  appears on this vacuum fluorescent display (VFD).
•  Hard Disk Lights Each of the 12 hot-swap drive  bays has a set of two status lights. These status  lights indicate the following:
  •  Hard Disk Status Light When the amber light  for a hard disk drive is lit continuously, the drive  has failed. When the light flashes slowly (one  flash per second), the drive is being rebuilt.  When the light flashes rapidly (three flashes per  second), the controller is identifying the drive.
  •  Hard Disk Activity Light When the green light  for a hard disk drive is flashing, the drive is  being accessed.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.