Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Disassembling the Drawer Hardware (Netfinity 7000 - 8651)



Disassembling the Drawer Hardware

If you are not going to reinstall the server or install another drawer model, remove the brackets from the server and the rack.
  1.  Remove and save the slide-bracket assemblies and screws for future use.
  2.  Remove the screws that attach the left slide rail to the front and rear mounting rails.
  3.  Remove the screws that attach the right slide rail to the front mounting brackets.
  4.  Remove the screws that attach the slide rail and cable-management arm to the rear of the rack.
  5.  Refer to the documentation that comes with the rack  for additional instructions.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.