![]() |
![]() ![]() |
To avoid breaking the retaining clips or damaging
the memory-module connectors, handle the clips gently.
NOTE: To ensure proper server operation, you must install memory modules in groups of four. All the memory modules installed in a bank must be the same size, but difterent banks can have different sized memory modules installed.
When you install the memory board in the server,
be sure that it is completely and correctly seated
in the system-board connector before you apply
power. (The latches on the boards will be
horizontal.) Incomplete insertion might cause
damage to the system board or the memory board.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.