IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Considerations (Netfinity 7000 - 8651)

•  The server comes with one CD-ROM drive and one  3.5-inch, 1.44 MB diskette drive.
•  The left front bays support 5.25-inch, half-high,  removable-media drives. Any two adjacent 5.25-inch,  half-high bays can be converted to a single full-high bay.

  NOTE: The server's EMI integrity and cooling are both  protected by having the left front bays covered or  occupied. When you install a drive, save the  filler panel from the bay, in case you later remove  the drive and do not replace it with another.

•  You cannot install hot-swap drives in the left front bays.
•  If you are installing a device with a 50-pin connector  in one ot the left front bays, you will need a  68-to-5O-pin converter (option P/N 32G3925).
•  The server supports twelve 1-inch (26 mm) slim or six  1.6-inch (42 mm) half-high, 3,5-inch hot-swap hard  disk drives in the hot-swap bays.
•  The hot-swap bays connect to two SCSI backplanes.  The backplanes are the printed circuit boards behind  the bays. Each backplane supports up to six hard disk drives.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.