 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Internal Drives (Netfinity 7000 - 8651)
Internal Drives
If you add different types ot dnvea. the system can read
multiple types of media and store more data. Several
types of drives are available, such as:
- Diskette
- Hard disk
- CD-ROM
- Tape
The server contains hardware that lets you replace a failed
hard disk drive without powering oft the server. Therefore,
you have the advadage of continuing to operate the
system while a hard disk drive is removed or installed.
These drives are known as hot-swap drives.
Each hot-swap drive bay has two indicator lights on the
front of the server. If the amber Hard Disk Status light for
a drive is lit continuously, that individual drive is faulty and
needs to be replaced. When the Hard Disk Status light
indicates a drive fault, you can replace a hot-swap drive
without powering off the server.
Each hot-swap drive that you plan to install must have a
hot-swap-drive tray attached. The drive must have a
single connector attachment (SCA) connector.
Hot-swap-drive trays come with the hot-swap drives.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.