 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Parallel Port (Netfinity 7000 - 8651)
Parallel Port
The parallel port usually is used to communicate with printers, and transfers data one byte at
a time using DMA The parallel port has a 25-pin.. female
D-shell connector on the back of the server. (Refer to
'Input/Output Connectors and Expansion Slots' for the location of the connector.)
When you power-on the server, the POST routine assigns
the parallel port a specific port address. You can change
the parallel-port assignment by using the System
Configuration Utility programs.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.