IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Starting the Setup Program (Netfinity 7000 - 8651)

1.  Power-on the server and watch the screen.
2.  The system prompts you to Press <F1> if you want  to run SETUP. As soon as you see that prompt,  press F1

    When POST completes, you will enter Setup.

   NOTE: If a configuration error occurs, a prompt appears  before the operating system starts (see 'Configuration Conflicts').

3.  If you have set a user or administrator password, the  system prompts you to enter it. If you have set both  passwords, enter either one.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.