|
|
|
| SCSI Messages |
Description |
|---|---|
| All | One or more of the following might be causing the problem. ° A failing SCSI device (adapter, drive, controller) ° An improper SCSI configuration ° Duplicate SCSI IDs in the same SCSI chain ° An improperly installed SCSI terminator ° A defective SCSI terminator ° An improperly installed cable ° A defective cable Action: Verify that: ° The external SCSI devices are turned on. External SCSI devices must be turned on before the system. ° The cables for all external SCSI devices are connected correctly. ° The last device in each SCSI chain is terminated correctly. (See 'SCSI Drives' for more SCSI chain information.) ° The SCSI devices are configured correctly. If the above are correct, run the diagnostics for additional information about the failing device. |
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.