|
|
|
| Module Name |
Description |
|---|---|
| Floppy | Run all enabled sub-tests in the floppy test module. |
| Floppy.1 | Run the first sub-test of the floppy test module, if enabled. |
| 1-5 | Run all enabled sub-tests of the first 5 test modules, in the .PKG file. |
A command line option can contain the following flags:
| Option | Description |
|---|---|
| /? | Prints the contents of the help file. |
| /AUTO (filename) |
Configures the test menu based on the hardware detected in the system. The system saves the configuration in the file name you provide. |
| /CF (filename) |
Specifies the configuration file to use. |
| /DT (nn) | Displays all sub-tests. If the sub-test is enabled, a + displays next to the sub-test. If disabled, a - displays next to the sub- test. nn is the number of lines to display. Press Enter to display the next screen of sub-tests. |
| /GROUP (chars) |
Runs the sub-tests that have the character string that you specify. |
| /HOURS (nn.n) |
Defines the length of time to continue testing. |
| /N (n) | Defines the number of times the test will loop. |
| /OVER | Overrides the disable flag on each sub-test loop. |
| /PC (product code) |
Provides the diagnostics program product code. |
| /PKG (filename) |
Processes the file name you provide instead of the default, T.PKG |
| /Q | No output to screen during testing. |
| /SAVE (filename) |
Saves the configuration to the file name you provide. |
| /SELF (filename) |
Configures the test menu based on the hardware detected in the system and saves it to the file name you provide. |
| /SHUFFLE (nn) |
Shuffles the run-list on each pass. nn is the number of passes. |
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.