|
|
|
| Error Message |
Description |
|---|---|
| POST Error Messages |
Appear when, during startup, POST finds problems with the hardware or detects a change in the hardware configuration. A list of these error messages is given in 'Symptom-to-FRU Index'. |
| POST Beep Codes |
Are sounds emitted from the speaker, if POST finds a Problem. One beep indicates The POST completed successfully. If the server halts while running POST, one or more beeps indicate that a Problem was found by the POST. A list of the beep error codes is given in 'Symptom-to-FRU Index' |
| Diagnostic Error Messages |
Appear when a test program finds a problem with a hardware Option. Normally, these messages are text, but they can be numeric. The test programe will generale one of the following return codes: 0 A return code of '0' indicates that the device passed its test. 1 A return code of '1' indicates that the device failed its test. 2 or higher A return code of '2' or higher indicates that the test stopped. |
| Software- Generated Error Messages |
Appear if a problem or conflict is found by an application program, the operating system, or both. For an explanation of these messages, refer to the information that comes with the software package |
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.