Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Starting the Ethernet Diagnostics



  Starting the Ethernet Diagnostics
To start the Ethernet Diagnostic Diskette:
  1.  Insert the backup copy of the Ethernet diagnostic diskette  into the diskette drive.
  2.  Power-on the server, or if it is already on,  shut down the operating system and restart the server.
  3.  Type /diags then, press Enter.
  4.  Follow the instructions on the screen.
  5.  When the diagnostic tests are complete, remove  the diskette from the diskette drive then, restart the server.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.