Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Running an Individual Test



  Running an Individual Test
To run an individual test:
  1.  From the expanded Test Group, use the up and down arrow keys  (   and   ) to move to the highlighted bar to the  test you want to run.
  2.  Press Enter to run the test.

    NOTE:   The results of the test appear in the lower-right-hand  Test Log window. Also, if you enabled Test Logging, the results are  recorded in the Test Log.

  3.  When the test completes, press Esc to return to the Test Group Menu.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.