Diagnostics and Test Information (Server 330)

^{IBM-AUSTRIA - PC-HW-Support 30 Aug 1999}

Diagnostics and Test Information

The following list contains problems and references for diagnosing a PC Server 330 Type 8640.

NOTE:

The QAPlus/PRO diagnostic progran recognizes the primary processor as LUN 1 and the secondary processor as LUN 2. During testing the program autom. tests LUN 1. You must select LUN 2 if you want the program to test the secondary processor.
The type of DASD diagnostics required to test the hard disk controller (adapter) and drives is determined by the type of hard disk adapter installed in the computer.
Always start with 'General Checkout'.

Problem Reference Error Codes/Error Messages 'Symptom-to-FRU Index' DASD Adapter Problems For non-disk-array modesl see 'SCSISelect Utility Program' For SCSI-2 Fast/Wide PCI-Bus RAID Adapter see 'PC ServeRAID Adapter' Memory see 'General Checkout' Power Supply Voltages 'Power Supply Voltages' Miscellaneous 'General Checkout'

Problem	Reference
Error Codes/Error Messages	'Symptom-to-FRU Index'
DASD Adapter Problems	For non-disk-array modesl see 'SCSISelect Utility Program' For SCSI-2 Fast/Wide PCI-Bus RAID Adapter see 'PC ServeRAID Adapter'
Memory	see 'General Checkout'
Power Supply Voltages	'Power Supply Voltages'
Miscellaneous	'General Checkout'

More INFORMATION / HELP is available at the IBM-HelpCenter

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.