|
|
|
SCSI Knockout Remove this knockout panel to
install the SCSI external connector cable.
Parallel Connector A signal cable for a parallel device,
such as a printer, connects here.
Serial Connectors Serial signal cables for modems or other
serial devices connect here to the two 9-pin serial connectors, port A and
port B. Serial port B shares a port assignment with the infra-red port.
See Devices and I/O Ports for port assignment information.
Infrared Connector An infrared (IR) transceiver module
option can connect here. See Devices and I/O Ports for port assignment
information.
Expansion Slots When you install an adapter into an expansion
slot, remove the external expansion slot cover for any external connectors
on the adapter.
Monitor Connector The monitor signal cable connects here.
Mouse Connector The mouse cable connects here. (Sometimes
called the auxiliary-device port.)
Keyboard Connector The keyboard cable connects here.
Ethernet Connectors There are two Ethernet connectors: A
DB-15 and an RJ-45. The DB-15 attachment unit interface (AUI) connector is
for attachment of external 10BASE2, 10BASE5, or 10BASE-F medium attachment
unit (MAU). The RJ-45 connector is for attachment to the integrated
10BASE-T (twisted-pair) transceiver. If the server was shipped with an
Ethernet interface cable, you must attach it to the RJ-45 connector on the
server, and the cable on the 10BASE-T device.
For more information about cables, see Ethernet Controller Messages
Power Connector The server power cable connects here.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.