 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Configuring PCI Features and Options (Server 330)
Configuring PCI Features and Options
PCI devices automatically communicate with the server
configuration information. This usually results in automatic
configuration of a PCI device. If a conflict does occur,
see 'Resolving Configuration Conflicts'
Multiple-function PCI adapters use more than one interrupt.
When you install one of these adapters, review the IRQ assignments
in the Configuration/Setup utility programs
(see 'PCI Bus Control').
Verify that the IRQ assignments are correct.
The PC Server 330 uses a rotational interrupt technique to configure
PCI adapters. This technique enables you to install
a variety of PCI adapters that
currently do not support sharing of PCI interrupts.
For information on manually overriding the interrupt,
see 'PCI Bus Control'
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.