 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
System Board - Switch Locations
Switch Locations
There are two switches found on the system board. Refer
to the figure and tables below on how to set these
switches.
Note: There is no switch to set the CPU voltage and
speed. The CPU board can sense the correct
working voltage and speed itself.
Password (SW2, Switch 2) Setting See > Power-On and Setup Password
| Password |
Bypass |
Check |
| Switch 2 |
On |
off |
Keyboard Language (SW2, Switch 3 and 4)
Keyboard
Language |
Japanese |
U.S. |
European |
| Switch 3 |
On |
Off |
Off |
| Switch 4 |
Off |
Off |
On |
Un-configured Sitches
| Reserved |
Default Settings |
| SW1 - 1 |
Off |
| SW1 - 2 |
Off |
| SW2 - 1 |
Off |
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.