|
|
| Symptom/Error | FRU/Action in Sequence |
|---|---|
| The system will not | 1. Keyboard (if control is from the keyboard) |
| enter hibernation mode. | 2. Hard disk drive |
| 3. System/planar board | |
| The system will not | 1. Keyboard (if control is from the keyboard) |
| wake up from | 2. Hard disk drive |
| hibernation mode. | 3. System/planar board |
| The system will not | 1. Lid switch |
| enter suspend mode | 2. System/planar board |
| after closing the LCD. | |
| Battery fuel-gauge | 1. Remove Battery ASM and let it cool for 2 hours. |
| does not go higher | 2. Refresh battery (continue using battery in BIOS Setup |
| than 90%. | mode until powe off, then charge battery). |
| 3. Battery | |
| 4. DC/DC & Charger board | |
| 5. System/planar board | |
| System configuration | 1. Load Setup Defaults and reboot the system. |
| does not match the | 2. Reseat the Combobay ASM. |
| installed devices. | |
| System hangs | 1. Reseat Hard Disk/Combobay ASM. |
| intermittently. | 2. Fan ASM |
| 3. System/planar board |
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.