|
|
|
| Symptom/Error | FRU/Action in Sequence |
|---|---|
| Device Address Conflict | 1. Load Setup Defaults in BIOS Setup Utility. |
| 2. Backup battery (RTC) | |
| 3. System/planar board | |
| Allocation Error | 1. Load Setup Defaults in BIOS Setup Utility. |
| for: device | 2. Backup battery (RTC) |
| 3. System/planar board | |
| Failing Bits: nnnn | 1. DIMM |
| 2. BIOS ROM | |
| 3. System/planar board | |
| Invalid System | 1. BIOS ROM |
| Configuration Data | 2. System/planar board |
| I/O device IRQ conflict | 1. Load Setup Defaults in BIOS Setup Utility. |
| 2. Backup battery (RTC) | |
| 3. System/planar board | |
| Operating system | 1. Enter BIOS Setup Utility and see if the hard disk |
| not found | drive and diskette drive A: are properly identified. |
| 2. Diskette drive (FDD ASM) | |
| 3. Hard disk drive | |
| 4. System/planar board | |
| Critical battery low | Save your work, then connect the AC Adapter to the computer to |
| recharge the battery. |
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.