Power-on the TV Tuner

^{IBM-AUSTRIA - PC-HW-Support 30 Aug 1999}

Power-on the TV Tuner

Power-on the TV Tuner

Use the ThinkPad Features program or PS2.EXE. to power-on the TV Tuner, then power-on the internal device in the diskette drive compartment.

If power for the internal device is turned off when the TV Tuner is set up, nothing appears on the LCD display. Turn on power for the TV Tuner again.

If you are using DOS, do one of the following:
- Power-on the computer and type PS2 from the command prompt to start the ThinkPad Features program.
  Select Set Power Features from the ThinkPad Features menu,then put a check mark at Internal Serial Port (or Diskette Drive Compartment) under the Power for devices. If you need help, press F1 to display the help menu.
- Type ps2 modem on from the command prompt, press the Enter key to set the power ON.
If you are using OS/2 or Microsoft Windows, do the following:
1. Power-on the computer and start the ThinkPad Features program.
2. Select the Power icon, then move the pointer to Internal Serial Port (or Diskette Drive Compartment) under the Power for devices and click the button to check mark it.
3. Press the OK button.

Back to

More INFORMATION / HELP is available at the IBM-HelpCenter

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.