|
|
|
| Symptom / Error | FRU / Action in Sequence |
|---|---|
| The system will not enter | 1. Go to 'Hibernation Mode' |
| hibernation. | 2. Ensure the 'System Hibernation Timer' in the Power |
| Management Settings' of BIOS Utility is not set to [OFF]. | |
| 3. Boot an operating system and press Fn+F8 and see if the | |
| if the computer enters hibernation mode. | |
| 4. Keyboard connector board | |
| 5. Keyboard | |
| 6. Hard disk connector board | |
| 7. Hard disk drive | |
| 8. System board | |
| The system will not wake | 1. Keyboard connector board |
| up from hibernation. | 2. Keyboard |
| 3. Hard disk connector board | |
| 4. Hard disk drive | |
| 5. System board | |
| The system will not enter | 1. Ensure the 'System Standby Timer' in the |
| standby after closing the LCD | Power Management Settings of BIOS Utility is |
| not set to [OFF]. | |
| 2. Chassis (LCD cover switch on chassis) | |
| 3. System board | |
| The system will not resume | 1. Chassis (LCD cover switch on chassis) |
| after opening the LCD | 2. System board |
| Battery fuel gauge does | 1. Remove battery pack and let it cool for 2 hours. |
| not go higher than 90% | 2. Refresh battery (continue to use battery until power off, |
| then charge battery). | |
| 3. Battery | |
| 4. Charger board | |
| 5. System board | |
| System configuration does | 1. Enter 'BIOS Utility' to execute Load Setup |
| not match the installed | Default Settings, then reboot system |
| devices. | 2. Reseat Hard disk/diskette/CD-ROM drive connector. |
| System hangs intermittently | 1. Hard disk/diskette/CD-ROM drive connector |
| 2. Fan (go to 'Running the Fan Diagnostics Program') | |
| 3. System board | |
| In DOS or Windows, | 1. Go to 'Audio Board Checkout' |
| multimedia programs, no | 2. Audio connector board |
| sound comes from the computer. | 3. Chassis (speaker on chassis) |
| (Only system beeps are heard | 4. System board |
| at power on. |
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.