Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

FRU Codes (3547)



FRU Codes

If an error is detected by the diagnostic tests, a four-digit FRU code is displayed. The FRU code indicates two suspected FRUs. Replace the FRU that is indicated by the two leftmost digits  first, then replace the FRU that indicated two rightmost digits.  No FRU is assigned to code 00. If only one FRU is suspected, the other FRU code is filled with zeros. See the reference page before replacing the FRU.

FRU Code FRU
10 1. System Board
30 Reserved
32 1. External Keyboard
2. Main Card
3. Riser Card
33 1. External Mouse
2. Main Card
3. Riser Card
45 External CRT
51 1. Reseat the Diskette Drive (FDD-2)
2. Diskette Drive (FDD-2)
3. Main Card
4. Riser Card
61 1. Reseat the Hard Disk Drive in SelectaDock Docking System (HDD-3)
2. Hard Disk Drive in SelectaDock Docking System (HDD-3)
3. Main Card
70 PCMCIA-2 (Replicator)
90 CD-ROM Drive
91 CD-ROM Drive in SelectaDock


If the problem still remains after replacement of the FRUs, go to 'Undetermined Problems'.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.