INSTALLING CMD USB HOST FILTER DRIVER FOR OSR2 AND MEMPHIS

[OSR2]
System should have USBsupplement installed prior to load filter 
driver.

1. Make a directory called FILTER in c: root directory and copy 
filter.zip file to it.

2. Unzip filter.zip file in Filter directory.  If a user uses dos 
version of pkunzip, pkunzip the file with switch -d in order to have 
all directories and files.  It will create OSR2 and Memphis 
directories and copies drivers in each directory.
i.e.) pkunzip filter.zip -d

3. Go to Device Manager (Click on Start-settings-Control Panel-System 
icon-Device Manager).

4. Double Click on Universal Serial Bus Host section and highlight 
on "Standard Open Host Controller," select property, click on driver 
tab.

5. Click on Update driver and follow "Update Device Driver" wizard. 
Make sure to click on "other location" option and type 
c:\filter\OSR2 when it searches for updated driver. If it searches 
67xftr97.sys file in OSR2 CD then type c:\filter\OSR2 where 
67xftr97.sys is located at.  If it searches for "Openhci.sys" file 
then type "c:\windows\system" in location. 

6.  Check USB Host string in Device Manager.  If it shows as "CMD 
USB 670 PCI to USB Universal Host Controller" then it loaded the
filter driver properly.




[Memphis (Windows 98)]
1. Make a directory called FILTER in c: root directory and copy 
filter.zip file to it.

2. Unzip filter.zip file in Filter directory.  If a user uses dos 
version of pkunzip, pkunzip the file with switch -d in order to have 
all directories and files.  It will create OSR2 and Memphis 
directories and copies drivers in each directory.
i.e.) pkunzip filter.zip -d

3. Run regedit program, delete the CMD signature:
   HKEY_LOCAL_MACHINE\ENUM\PCI\VEN_1095&DEV_0670...

4. Go to MS DOS prompt under Memphis and change directory to
   windows\inf.  Next, backup these two files, drvide.bin and drvdata.bin,
   or delete them.  They are the database files for all hardware in your
   system.  Win95 will always rebuilt them if missing.

5. Change directory to c:\filter and copy this file, 67xftr98.inf, to
   c:\windows\inf directory.  Type exit.

6.  Reboot the system and follow "Add new hardware wizard" in order to 
load Microsoft default driver for CMD USB Host Controller.

8. Make sure to click on "specify a location" option and type 
c:\filter\memphis when it searches for updated driver. If it searches 
67xftr98.sys file in Windows 98 CD then type c:\filter\memphis where 
67xftr98.sys is located at.

9.  Check whether filter driver 67xftr98.sys is installed properly
in Device Manager-CMD USB0670 PCI to USB Open Host Controller-property
-driver-Driver files detail.  If there is 67xftr98.sys, then it is loaded
properly.