Preparation 1. Use a DOS startup disk to start the Notebook Computer. 2. Run FDISK utility from DOS to create a bootable partition. After A prompt, type fdisk. (A: fdisk) Choose "1" and "C" to create hard disk as drive C: (See DOS manual for the operation detail.) 3. Format hard disk. Follow the command "Format C:/S" to create a bootable hard disk and a bootable floppy disk. (A: format C) (C;/S copies system files to the formatted disk) 4. Copy the file [MSCD.EXE] from Dos disk to drive C: 5. Insert the disk of the CD-ROM driver. Type "Install" after A prompt (A: install) See the driver manual for detail. 6. Restart the system Installing Drivers for Windows 95 OSR2.1 Step I: Run USB supplement path update file * After finishing Win95 ORS2.1 installation, go to Win95. * Download the file from Microsoft Web Site to run the USB supplement path. Step II: Setup [TXPATCH] * Under Win95, open the driver [TXPATCH] Intel 82371xb.inf TX chip from the compact disk. * Open [setup.exe.] and follows the instruction to complete the installation. * Restart the system. Step III. VGA Driver Installation * Under Win95, Click [Start] at the bottom-left corner on the screen. Select [Run]. Open the path [D:\WIN9X\setup.exe] Note: When ATI VGA driver has been existed in Win95 system, Click [Start]. Select [Run]. Open the path [atiuinst-clean]. Double-click [Ok] to finish installation. Step IV: Audio Driver Installation * Under Win95, click [Start]; select [Setting]; click [Control Panel] \ [SYSTEM] \ [Device Manager]\ [Other Devices] and delete [Unknown Device] by clicking [Remove] and [Ok]. * Restart the notebook; go to Win95. The program will automatically find out [Add New Hardware Wizard] (PCI Multimedia Audio Device). Click [Next]\[Other Locations] and [Browse] to find the path from CD-ROM driver as [CD-ROM drive: \Audio\Win95]. Then click [Ok]. Press [Finish] to set up the first audio driver. Step V: PCMCIA Driver Installation * Under Win95, click [Start]; open [Setting], [Control Panel], [System], [Device Manager], select [Other Device] and remove [PCI CardBus Bridge]. Select [Ok] * Under Control Panel, choose [Add New Hardware]; click [Add PCMCIA Socket]. Choose the file [pcmcia.inf] from the disk or CD to install. Click the following one by one, [Manufacture Texas Instruments], [Texas Instruments], [PCI-1225 CardBus Control], [ Next], [Next] and [Finish]. * Before restarting the system, copy the file [PCMCIA.inf] to [c:\windows\inf] Note: Make sure whether the files are copied to drive C successfully. [c:\windows\system\cbss.vxd] [c:\windows\system\pccard.vxd] [c:\windows\system\pci.vxd] [ c:\windows\inf\pcmcia.inf] Step VI: Video-in Driver Installation * Boot the system, switching to SCU system by press keys Ctrl+Alt+S before running Windows. Choose [Components] from the top of the screen. Choose [Enable] for [Video-In Mode] * Under Windows, Select [Start], [Run] and open the path [D:\video-in \setup.exe] to complete the installation. Drivers for Windows 98 Step I: VGA Driver Installation * After installing Win98 successfully, enter into the system. Click [Start] at the bottom-left corner on the Windows screen; select [Run]; open the path of [D:\WIN9X\setup.exe] to run VGA driver installation. * When ATI VGA driver has been already included in the system, click [Start], select [Run] and open the path of [\atiuinst-clean] and double-click [Ok]. Note: For system ATI VGA included, uninstall the original VGA Driver and then install the driver. Step II: Audio Driver Installation * Under Win98, click [Start]; select [Setting], [Control Panel], and [System]. Open [Device Manager]; select [Other Devices]; press [Remove] to delete [PCI Multimedia Audio Device]. Click [Ok] and restart the notebook. * Enter into Win98. The program will automatically find out [Add New Hardware Wizard]; choose [PCI Multimedia Audio Device], [Next] and click [Browse] to enable the setting of [specify a location]. Open the path of [D:\audio\WIN95], click [Next] and [Fi nish] to set up the first audio driver. Step III: PCMCIA Driver Installation Go to Win98. Click [Start], [Control Panel], and [System]. Remove PCMCIA and also delete two sub-directories [Generic CardBus Controller]. * Switch to DOS. Copy the file [PCMCIA.inf] to the directory [C:\windows\inf]. * Reboot Win98 system. Step IV: Video-in Driver Installation * Restarting the notebook, before entering windows, press the keys Ctrl+Alt+S to switch to SCU status. Select [Component] and choose [Enable] for [Video-In Mode]. * Under Win98, click [Start], [Run] and open the path [D:\video-in\setup.exe] to complete the installation. Drivers for Windows NT 4.0 Preparation * Install [Service Pack3] to the system or see Microsoft for the latest operation system update. Step I: VGA Drivers * Choose [Start], [Setting], and [Control Panel]. Open [Display], [Setting], [Display Type], and [Change]. Then, Chick [Have Disk] and [Browse] and open the path [D:\VGA\NT4.0]. Click [Ok] to copy all concerned files to the hard disk. * Restart WinNT4.0 system. Step II: Audio Drivers (ESS 1978 M2EM / 1978S M2E) * Under WinNT 4.0 system, click [Start], [Setting], [Control Panel], [Multimedia] and [Device]. Click [Add], [Ok] and [Browse] to open the path [D:\audio\NT4.0] and select [Ok] to exit. * Reboot the system.