Jumper Settings for TX98-3D/TX98

Jumper Settings for T530B

T530B-S provides manual mode for Jumper Settings.

Jumper setting

Set Jumper “CLOSE” [1-2], Set Jumper “OPEN” [2-3]

I.E. Jumper setting for 2.2V core

JP5 setting

JP5	1	2	3
1-2 (VID4)
3-4 (VID3)
5-6 (VID2)
7-8 (VID1)
9-10 (VID0)

FOR INTEL PENTIUM CPU

CPU TYPE	Frequency (MHz)	Ratio	External Bus Speed (MHz)	SD JP2 1-2	FQ2 JP2 3-4	FQ1 JP2 5-6	FQ0 JP2 7-8	BF0 JP3 1-2	BF1 JP3 3-4	BF2 JP3 5-6
P54C	166	2.5x	66	[2-3]	[1-2]	[1-2]	[1-2]	[1-2]	[1-2]	[2-3]
P54C	133	2.0x	66	[2-3]	[1-2]	[1-2]	[1-2]	[1-2]	[2-3]	[2-3]
P54C	100	1.5x	66	[2-3]	[1-2]	[1-2]	[1-2]	[2-3]	[2-3]	[2-3]

P55C	233	3.5x	66	[2-3]	[1-2]	[1-2]	[1-2]	[2-3]	[2-3]	[2-3]
P55C	200	3.0x	66	[2-3]	[1-2]	[1-2]	[1-2]	[2-3]	[1-2]	[2-3]
P55C	166	2.5x	66	[2-3]	[1-2]	[1-2]	[1-2]	[1-2]	[1-2]	[2-3]

FOR CYRIX/IBM 6x86/ 6x86L/ 6x86MX/ MII CPU

CPU TYPE	Frequency (MHz)	Ratio	External Bus Speed (MHz)	SD JP2 1-2	FQ2 JP2 3-4	FQ1 JP2 5-6	FQ0 JP2 7-8	BF0 JP3 1-2	BF1 JP3 3-4	BF2 JP3 5-6
MII PR366	366	2.5x	100	[2-3]	[2-3]	[1-2]	[1-2]	[1-2]	[1-2]	[2-3]
MII PR333	333	3.0x	83	[2-3]	[1-2]	[2-3]	[1-2]	[2-3]	[1-2]	[2-3]
MII PR300	300	3.0x	75	[2-3]	[1-2]	[1-2]	[2-3]	[2-3]	[1-2]	[2-3]
MII PR300	300	3.5x	66	[2-3]	[1-2]	[1-2]	[1-2]	[2-3]	[2-3]	[2-3]
6x86MX-PR233	200	3.0x	66	[2-3]	[1-2]	[1-2]	[1-2]	[2-3]	[2-3]	[2-3]
6x86MX-PR200	166	2.5x	66	[2-3]	[1-2]	[1-2]	[1-2]	[1-2]	[1-2]	[2-3]
6x86 PR166+	133	2.0x	66	[2-3]	[1-2]	[1-2]	[1-2]	[1-2]	[2-3]	[2-3]
6x86 PR166	133	2.0x	66	[2-3]	[1-2]	[1-2]	[1-2]	[1-2]	[2-3]	[2-3]

FOR AMD-K5/K6/K6-2/K6-III CPU

CPU TYPE	Frequency (MHz)	Ratio	External Bus Speed (MHz)	SD JP2 1-2	FQ2 JP2 3-4	FQ1 JP2 5-6	FQ0 JP2 7-8	BF0 JP3 1-2	BF1 JP3 3-4	BF2 JP3 5-6
K6-III/550	550	5.5x	100	[2-3]	[2-3]	[1-2]	[1-2]	[2-3]	[2-3]	[1-2]
K6-III/500	500	5.0x	100	[2-3]	[2-3]	[1-2]	[1-2]	[2-3]	[1-2]	[1-2]
K6-III/475	475	5.0x	95	[2-3]	[1-2]	[2-3]	[2-3]	[2-3]	[1-2]	[1-2]
K6-III/450	450	4.5x	100	[2-3]	[2-3]	[1-2]	[1-2]	[1-2]	[1-2]	[1-2]
K6-III/400	400	4.0x	100	[2-3]	[2-3]	[1-2]	[1-2]	[1-2]	[2-3]	[1-2]

K6-2/500	500	5.0x	100	[2-3]	[2-3]	[1-2]	[1-2]	[2-3]	[1-2]	[1-2]
K6-2/475	475	5.0x	95	[2-3]	[1-2]	[2-3]	[2-3]	[2-3]	[1-2]	[1-2]
K6-2/450	450	4.5x	100	[2-3]	[2-3]	[1-2]	[1-2]	[1-2]	[1-2]	[1-2]
K6-2/400	400	4.0x	100	[2-3]	[2-3]	[1-2]	[1-2]	[1-2]	[2-3]	[1-2]

K6-2/380	380	4.0x	95	[2-3]	[1-2]	[2-3]	[2-3]	[1-2]	[2-3]	[1-2]
K6-2/366	366	5.5x	66	[2-3]	[1-2]	[1-2]	[1-2]	[2-3]	[2-3]	[1-2]
K6-2/350	350	3.5x	100	[2-3]	[2-3]	[1-2]	[1-2]	[2-3]	[2-3]	[2-3]
K6-2/333	333	3.5x	95	[2-3]	[1-2]	[2-3]	[2-3]	[2-3]	[2-3]	[2-3]
K6-2/300	300	3.0x	100	[2-3]	[2-3]	[1-2]	[1-2]	[2-3]	[1-2]	[2-3]
K6-2/266	266	4.0x	66	[2-3]	[1-2]	[1-2]	[1-2]	[1-2]	[2-3]	[1-2]

K6/300	300	4.5x	66	[2-3]	[1-2]	[1-2]	[1-2]	[1-2]	[1-2]	[1-2]
K6/266	266	4.0x	66	[2-3]	[1-2]	[1-2]	[1-2]	[1-2]	[2-3]	[1-2]
K6/233	233	3.5x	66	[2-3]	[1-2]	[1-2]	[1-2]	[2-3]	[2-3]	[2-3]
K6/200	200	3.0x	66	[2-3]	[1-2]	[1-2]	[1-2]	[2-3]	[1-2]	[2-3]
K6/166	166	2.5x	66	[2-3]	[1-2]	[1-2]	[1-2]	[1-2]	[1-2]	[2-3]

K5/133	100	1.5x	66	[2-3]	[1-2]	[1-2]	[1-2]	[2-3]	[2-3]	[2-3]
K5/100	100	1.5x	66	[2-3]	[1-2]	[1-2]	[1-2]	[2-3]	[2-3]	[2-3]

CPU Voltage Selection

CPU Type	Voltage Requirements
Intel Pentium Cyrix/IBM M1 6x86 AMD K5 IDT-C6	3.4V(STD) / 3.5V(VRE)
Intel Pentium with MMX Cyrix/IBM M1 6x86L	2.8V
Cryix/IBM 6x86MX, MII AMD-K6-166, 200	2.9V
AMD-K6-233	3.2V
AMD-K6 - 233,266, 300 AMD-K6-2 - 266,300,333,350,366,380,400,450,475,500,550 AMD-K6-III – 400,450,475,500,550	2.2V
AMD-K6-2 - 450,475 AMD-K6-III – 400,450	2.4V

CPU Core Voltage Setting Table

Vcore	VID4 JP5 1-2	VID3 JP5 3-4	VID2 JP5 5-6	VID1 JP5 7-8	VID0 JP5 9-10
1.8V	[1-2]	[1-2]	[2-3]	[1-2]	[2-3]
2.0V	[1-2]	[1-2]	[1-2]	[1-2]	[2-3]
2.2V	[2-3]	[2-3]	[2-3]	[1-2]	[2-3]
2.4V	[2-3]	[2-3]	[1-2]	[2-3]	[2-3]
2.5V	[2-3]	[2-3]	[1-2]	[2-3]	[1-2]
2.8V	[2-3]	[1-2]	[2-3]	[2-3]	[2-3]
2.9V	[2-3]	[1-2]	[2-3]	[2-3]	[1-2]
3.1V	[2-3]	[1-2]	[2-3]	[1-2]	[1-2]
3.2V	[2-3]	[1-2]	[1-2]	[2-3]	[2-3]
3.3V	[2-3]	[1-2]	[1-2]	[2-3]	[1-2]
3.5V	[2-3]	[1-2]	[1-2]	[1-2]	[1-2]

All CPU / SDRAM/ PCI Frequency Setting Table

SD JP2 1-2	FQ2 JP2 3-4	FQ1 JP2 5-6	FQ0 JP2 7-8	CPU	SDRAM	PCI
[2-3]	[1-2]	[1-2]	[1-2]	66.8	66.8	33.4
[2-3]	[1-2]	[1-2]	[2-3]	75	75	30
[2-3]	[1-2]	[2-3]	[1-2]	83.3	83.3	33.3
[2-3]	[1-2]	[2-3]	[2-3]	95	95	31.7
[2-3]	[2-3]	[1-2]	[1-2]	100	100	33.3
[2-3]	[2-3]	[1-2]	[2-3]	112	112	37.3
[2-3]	[2-3]	[2-3]	[1-2]	124	124	41.3
[2-3]	[2-3]	[2-3]	[2-3]	133.3	133.3	33.3

[1-2]	[1-2]	[1-2]	[1-2]	66.8	89	33.4
[1-2]	[1-2]	[1-2]	[2-3]	83.3	66.8	33.4
[1-2]	[1-2]	[2-3]	[1-2]	95	76	31.7
[1-2]	[1-2]	[2-3]	[2-3]	100	66.6	33.3
[1-2]	[2-3]	[1-2]	[1-2]	100	75	33.3
[1-2]	[2-3]	[1-2]	[2-3]	112	84	37.3
[1-2]	[2-3]	[2-3]	[1-2]	124	93	41.3
[1-2]	[2-3]	[2-3]	[2-3]	103	103	34.3

Bus Frequency Ratio Setting Table

Ratio	BF0 JP3 1-2	BF1 JP3 3-4	BF2 JP3 5-6
1.5x / 3.5x	[2-3]	[2-3]	[2-3]
2.0x	[1-2]	[2-3]	[2-3]
2.5x	[1-2]	[1-2]	[2-3]
3.0x	[2-3]	[1-2]	[2-3]
4.0x	[1-2]	[2-3]	[1-2]
4.5x	[1-2]	[1-2]	[1-2]
5.0x	[2-3]	[1-2]	[1-2]
5.5x	[2-3]	[2-3]	[1-2]

Clear CMOS

Set the Jumper JP6 [1-2] to clear the CMOS
Remember: Please set JP6 back to normal [2-3] after clear CMOS.

Copyright(c) 2000 Zida Technologies Limited. All Rights Reserved.
Last Updated on 17 July 2000

Legal Notice

JP5

1

JP5 3-4

JP3 1-2