Jumper Settings for 6MLX

Jumper Settings for 6MLX

CPU Speed Selection

CPU Speed (MHz)	External Bus Speed (MHz)	JP2	JP3	JP4	JP5	Frequency Ratio
233	66	Open	Open	Close	Close	3.5x
266	66	Close	Close	Open	Close	4x
300	66	Open	Close	Open	Close	4.5x
333	66	Close	Open	Open	Close	5x

CPU Voltage Selection
The CPU voltage is automatically detected. No jumper setting is needed.

CMOS Reset
If you want to reset the CMOS data, please follow the procedures as below:
1. Switch off the power supply of your system
2. Set jumper JP11 to position 2-3
3. Then reinstall the jumper to position 1-2

Jumper	JP11
Normal	1-2
Reset	2-3

After CMOS reset, all data in CMOS will be lost. So you need to re-enter the data again.

Other Jumpers
JP16 and JP17 are for Flash BIOS type select. The default settings are 1-2.

Jumper	Default setting
JP16, JP17	1-2