ZIDA

MANUAIS DE MOTHERBOARDS ZIDA

Jumper Settings for 6DXP


CPU Speed Selection

CPU Speed (MHz) External Bus (MHz) JP4 JP5 JP15 JP16
150 60 [Short] [Open] [Short] [Open]
166 66 [Open] [Short] [Open] [Short]
180 60 [Short] [Open] [Short] [Open]
200 66 [Open] [Short] [Open] [Short]

 

Frequency Ratio JP8 JP9 JP10
2.5x [Open] [Short] [Short]
2.5x [Open] [Short] [Short]
3x [Short] [Open] [Short]
3x [Short] [Open] [Short]

CPU Voltage Selection
The CPU voltage is automatically detected.   No jumper setting is needed.

CMOS Reset
If you want to reset the CMOS data, please follow the procedures as below:
1. Switch off the power supply of your system
2. Short jumper JP19

Description JP19
Normal Operation Open
CMOS Reset Short

After CMOS reset, all data in CMOS will be lost. So you need to re-enter the data again.