Jumper Settings for 5DVX


FOR INTEL PENTIUM / PENTIUM WITH MMX TECHNOLOGY CPU

CPU Type JC1 JC2 JP8 JP9 JP6 Bus Frequency MHz
Pentium 75 2-3 2-3 2-3 2-3 1-2 50
Pentium 90 1-2 2-3 2-3 2-3 2-3 60
Pentium 100 2-3 1-2 2-3 2-3 2-3 66
Pentium 120 1-2 2-3 2-3 1-2 2-3 60
Pentium 133 2-3 1-2 2-3 1-2 2-3 66
Pentium 150 1-2 2-3 1-2 1-2 2-3 60
Pentium 166 2-3 1-2 1-2 1-2 2-3 66
Pentium 180 1-2 2-3 1-2 2-3 2-3 60
Pentium 200 2-3 1-2 1-2 2-3 2-3 66
Pentium 166 MMX * 2-3 1-2 1-2 1-2 2-3 66
Pentium 200 MMX * 2-3 1-2 1-2 2-3 2-3 66

FOR CYRIX/IBM CPU

CPU Type JC1 JC2 JP8 JP9 JP6 Bus Frequency MHz
Cyrix / IBM PR120 2-3 2-3 OPEN OPEN 1-2 50
Cyrix / IBM PR133 1-2 1-2 OPEN OPEN 2-3 55
Cyrix / IBM PR150 1-2 2-3 OPEN OPEN 2-3 60
Cyrix / IBM PR166 2-3 1-2 OPEN OPEN 2-3 66

FOR AMD-K5 CPU

CPU Type JC1 JC2 JP8 JP9 JP6 Bus Frequency MHz
AMD-K5-PR75 2-3 2-3 2-3 2-3 1-2 50
AMD-K5-PR90 1-2 2-3 2-3 2-3 2-3 60
AMD-K5-PR100 2-3 1-2 2-3 2-3 2-3 66
AMD-K5-PR120 1-2 2-3 2-3 2-3 1-2 60
AMD-K5-PR133 2-3 1-2 2-3 2-3 2-3 66
AMD-K5-PR150 1-2 2-3 1-2 1-2 2-3 60
AMD-K5-PR166 2-3 1-2 1-2 1-2 2-3 66


CMOS DISCHARGE

Setting JP4
Normal OPEN
Discharge CLOSE


P54C / P55C* INTEL MMX PENTIUM VOLTAGE SELECT

Setting JP7 P55C 2.8V * P54C 3.52V
1-2, 3-4, 5-6, 7-8 OPEN CLOSE

* Optional feature. Please check with your supplier your board supports MMX CPU or not.


The following jumpers are for functional testing. Normally, you did not need to change these settings.

Jumper Default Setting
JP10 2-3
JP11 OPEN
JP12 2-3
JP13 1-2
JP14 2-3

Tomato Logo
Copyright(c) 1998 Zida Technologies Limited. All Rights Reserved.
Last Updated on 29 May 1998

Legal Notice