|
Jumper Settings for
5DTX
CPU Speed
Selection
JP5 and JP6 for external bus frequency
JP10 for frequency ration setting
INTEL PENTIUM CPU
Internal CPU Speed MHz |
External Bus Speed MHz |
JP5 |
JP6 |
Frequency Ratio |
JP10 |
90 |
60 |
[1-3],[4-6] |
[2-3] |
1.5x |
[1-3],[2-4] |
100 |
66 |
[3-5],[2-4] |
[2-3] |
1.5x |
[1-3],[2-4] |
120 |
60 |
[1-3],[4-6] |
[2-3] |
2x |
[1-3],[4-6] |
133 |
66 |
[3-5],[2-4] |
[2-3] |
2x |
[1-3],[4-6] |
150 |
60 |
[1-3],[4-6] |
[2-3] |
2.5x |
[3-5],[4-6] |
166 |
66 |
[3-5],[2-4] |
[2-3] |
2.5x |
[3-5],[4-6] |
180 |
60 |
[1-3],[4-6] |
[2-3] |
3x |
[3-5],[2-4] |
200 |
66 |
[3-5],[2-4] |
[2-3] |
3x |
[3-5],[2-4] |
233 |
66 |
[3-5],[2-4] |
[2-3] |
3.5x |
[1-3],[2-4] |
CYRIX / IBM 6X86 CPU
Internal CPU Speed MHz |
External Bus Speed MHz |
JP5 |
JP6 |
Frequency Ratio |
JP10 |
PR133 |
55 |
[3-5],[4-6] |
[1-2] |
2x |
[1-3],[4-6] |
PR166 |
66 |
[3-5],[2-4] |
[2-3] |
2x |
[1-3],[4-6] |
PR200 |
75 |
[1-3],[4-6] |
[1-2] |
2x |
[1-3],[4-6] |
AMD K5 CPU
Internal CPU Speed MHz |
External Bus Speed MHz |
JP5 |
JP6 |
Frequency Ratio |
JP10 |
PR90 |
60 |
[1-3],[4-6] |
[2-3] |
1.5x |
[1-3],[2-4] |
PR100 |
66 |
[3-5],[2-4] |
[2-3] |
1.5x |
[1-3],[2-4] |
PR133 |
66 |
[3-5],[2-4] |
[2-3] |
1.5x |
[1-3],[2-4] |
PR150 |
60 |
[1-3],[4-6] |
[2-3] |
1.75x |
[3-5],[4-6] |
PR166 |
66 |
[3-5],[2-4] |
[2-3] |
1.75x |
[3-5],[4-6] |
AMD K6 CPU
Internal CPU Speed MHz |
External Bus Speed MHz |
JP5 |
JP6 |
Frequency Ratio |
JP10 |
PR166 |
66 |
[3-5],[2-4] |
[2-3] |
2.5x |
[3-5],[4-6] |
PR200 |
66 |
[3-5],[2-4] |
[2-3] |
3x |
[3-5],[2-4] |
PR233 |
66 |
[3-5],[2-4] |
[2-3] |
3.5x |
[1-3],[2-4] |
CPU Voltage Selection
JP16 for CPU I/O and chipset voltage selection
JP15 for CPU core voltage selection
JP9 for MMX CPU split power plan
Please check your CPU
voltage requirements before doing the below jumper settings.
CPU Type |
JP9 |
Intel Pentium Cyrix/IBM 6x86 AMD
K5 |
[1-2],[3-4],[5-6],[7-8] |
Intel MMX Pentium Cyrix/IBM
6x86L AMD K6 |
Fully
open |
CPU I/O Voltage
Selection
JP16 |
I/O Voltage |
1-2 |
3.3V |
3-4 |
3.52V |
CPU Core Voltage Selection
JP15 |
Core Voltage |
1-6 |
2.8V |
2-7 |
2.9V |
3-8 |
3.2V |
4-9 |
3.3V |
5-10 |
3.5V |
CAUTION:
For MMX or other split power plane CPU, JP9 muse be
fully opened before turning on the system power. Failure to do so may
cause damages to your CPU.
CMOS Reset
JP8 is used to clear the content of CMOS.
After reset, all system BIOS configuration will be lost.
Description |
JP8 |
CMOS Clear |
[1-2] |
Normal operation |
[2-3]
(default) |
Copyright(c) 1997 Zida Technologies Limited. All Rights
Reserved. Last Updated on 3 Oct 97 HKT 15:30
Legal
Notice
|