![]() |
![]() |
Note : There are no Jumper settings for CPU bus speed or clock multiplier on the Trinity KT board. The Trinity KT is designed to automatically detect the socketed Duron / Athlon CPU and its proper speed settings. |
![]() |
![]() |
External Pin Assignments (Jumper J1) |
![]() |
|
|
|
![]() |
![]() |
Note :
If you have been locked out of your system because you forgot your password or set the CMOS incorrecttly, follow the instructions below:
By following this procedure, you will erase your password and reset the CMOS to the BIOS defaults. |
![]() |
© Copyright 2001, Tyan Computer Corporation. All Rights Reserved. |