Note for Pentium III 600+ MHz or Celeron 600+ MHz users.
There is no need to worry about setting the correct jumper settings for a Pentium III or a Celeron at 600+ MHz, because the CPU multiplier is hardwired into the CPU and changing jumper settings will not make any difference.  The BIOS will automatically detect the correct CPU speed that is installed.

CPU Settings for 66/100/133 MHz Bus

Multiplier Bus speed Clock Speed JP10 JP11 JP12 JP13 3.5 66 100 133 233MHz 350MHz 466MHz ON OFF OFF ON 4.0 66 100 133 266MHz 400MHz 533MHz OFF ON ON ON 4.5 66 100 133 300MHz 450MHz 600MHz OFF ON OFF ON 5.0 66 100 133 333MHz 500MHz 667MHz OFF OFF ON ON 5.5 66 100 133 366MHz 550MHz 733MHz OFF OFF OFF ON 6.0 66 100 133 400MHz 600MHz 800MHz ON ON ON OFF 6.5 66 100 133 433MHz 650MHz 866MHz ON ON OFF OFF 7.0 66 100 133 466MHz 700MHz 933MHz ON OFF ON OFF 7.5 66 100 133 500MHz 750MHz 1000MHz ON OFF OFF OFF 8.0 66 100 133 528MHz 800MHz 1064MHz OFF ON ON OFF

	Hardware CMOS / Password Reset

Default Reset JP2 1-2 2-3

© Copyright 2001, Tyan Computer Corporation. All Rights Reserved.