J24,32,33: CPU Speed
|
|
J24,32,33: CPU Speed |
|
|
|
Only on PCB-05 or later |
|
|
J35-40: Voltage Regulator Settings for P54C - P55C at bottom |
|
|
|
Default values are for the Intel Pentium P54C. If you are using a Cyrix Processor, contact Cyrix for proper the proper voltage selection. If you are using an IBM/SGS 6x86/M1 processor, a "016" marking indicates a 3.3V CPU. A "028" marking indicates a 3.48V CPU. Contact your CPU vendor for further assistance. |
|
|
J1-2, J9,11, J4-6: Memory Voltage Settings (Bold = DEFAULT) |
|
|
|
We don't know what voltage your memory is. Contact your memory vendor for proper voltage selection. Damage to your system and memory will result if voltage is set improperly! |
|
|
J28-31: Cache type selection (Bold=DEFAULT on PCB-05) |
|
|
|
BOLD settings only apply to PCB-05 revs only. All others, use the alternate settings in black. |
|
|
|
|
MMX CPU Settings are only supported on Titan III motherboards with PCB-05 or greater only. All other revisions are not mmx ready . |
|
© Copyright 2001, Tyan Computer Corporation. All Rights Reserved. |